※ dry sterilization: According to the different needs of different industries match the different requirements of the filter, to ensure the use of results-oriented and promote customer satisfaction.
※ rust spray: gas tank internal rust, antibacterial treatment, the source to ensure gas cleanliness and product safety.
※ safe to use: The machine is equipped with multiple automatic protection system, when the use of the environment voltage, pressure or current and any other anomalies will automatically shut down to protect equipment and personal safety.
※ easy to operate: power is ready to use, automatic design, work without special duty; air pressure can be adjusted according to the requirements of use, without complicated maintenance, only regular drainage.
※ fashion, practical: BEST DENT air compressor stylish design, performance and practical, according to the specifications of the working life of 20,000 hours or more; the design are the industry's top engineers for the natural outstanding.
Voltage: 110V~240V, 50Hz/60Hz
Power: 1 HP
Noise: 52 dB(A)/40”
Tank: 40L (the color is optional)
Pressure: 8 Bar
N.W: 27 Kgs
G.W.: 29 Kgs
Air compressor failure analysis
Oil leakage failure analysis In the daily operation of oil-free silent air compressor, oil-free silent air compressor leakage often occurs, the appearance of oil spills.
Oil-free mute air compressor oil leakage failure reasons:
1. Oil seal or oil seal defects leak.
2. The loose shaft led to oil seal leakage.
3. Leakage combined surface, into the return pipe connector loose.
4. Belt installation is too tight lead to the main bearing wear.
5. Casting or machining defects can also cause oil-free silent air compressor oil spills.
Oil free air compressor oil leakage fault judgment and troubleshooting:
Oil free air compressor oil leaks, pay attention to observe the oil seal parts, check whether there is cracked oil seal, lip cracking or flanging. Have one of the above conditions should be replaced; Check the oil seal and spindle with scratches and defects, there is scratches and defects should be replaced. Check the return oil is smooth, poor return to the crankcase pressure is too high lead to oil spill or fall off, you must ensure that the minimum diameter of the return pipe, and not distorted, not bending, smooth back to the oil. Check the oil seal, with the size of the box, do not meet the standards to be replaced.