The compressor should be located far away from the clinic to reduce and eliminate noise, vibration and heat emissions. If the distance is too close to be noise processing. The air supplied to the compressor should be as dry and dry as possible from the outside and the compressor and aspirator should not be in the same room. After leaving the compressor, the air line should be tilted to a lower position and a drain valve should be fitted to remove condensed water. Compressor switch: light switch should be located in the prominent part of the clinician is clearly visible to leave to remind the doctor to turn off the power, the exhaust device should also install the appropriate light switch, preferably located in the compressor Switch near.
Voltage: 110V~240V, 50Hz/60Hz
Power: 1.5 HP
Noise: 54 dB(A)
Tank: 50L (the color is optional)
Pressure: 8 Bar
N.W: 45 Kgs
G.W.: 55 Kgs
Dimension: 73*42*72 cm
1. Oil-free piston structure, gas source pollution-free;
2. Gas tank, Regulated air supply, Elimination of pulse;
3. Double air pressure function, double file control switch:
Low-pressure automatic transmission for normal use; Small air compressor, non-stop gear, can be used for temporary high-pressure pneumatic tools.
4. Adjustable working pressure, barometer display;
5. Automatic pressure relief device, no pressure to start, the motor is more durable;
6. Motor accidental overheating, automatic shutdown protection, automatic reset after cooling;
7. Gas tank safety device, over-voltage protection is safe and reliable;
8. Quiet, no noise.